Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Electronic Service
Manuals
This electronic document is provided as a service to our customers.
We do not create the contents of the information contained in this docu-
ment. Should you have detailed questions pertaining to the information
contained in this document, you may contact Michco, or the manufac-
turer which provided the original information in this electronic deliver-
able. Michco's only part in this electronic deliverable was the electronic
assembly process. By providing this manual on line we are not guaran-
teeing parts availability.
You may contact Michco through the following methods:
Phone (517) 484-9312 or (800) 331-3339
2011 N. High St. -- Lansing, Michigan -- 48906
Fax: (517) 484-9836
Email: CustServe@Michco.com
Web site: www.Michco.Com
Parts Web site: www.FloorMachineParts.Com
Order Parts on Line at:
www.FloorMachineParts.Com
Directly to Parts & Service:
By Email:
Shop@Michco.com
By Fax: (517) 702-2041
By Voice: Use numbers above.
Serving the Cleaning Industry Since 1922
Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners.
Manuals are subject to Manufacturer's reproduction limitations. Originals or reproductions were provided by manufacturers
through a request. We make no warranty as to the correctness of information provided in this document and you assume
all risk. By placing these manuals on line we are not declaring our corporation to be an manufacturer authorized dealer or
provider, please check our web site for authorized manufacturers we represent.
Publicidad
Tabla de contenido
Manuales relacionados para Clarke American Sanders 07100A
Resumen de contenidos para Clarke American Sanders 07100A
- Página 1 Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this docu- ment. Should you have detailed questions pertaining to the information contained in this document, you may contact Michco, or the manufac- turer which provided the original information in this electronic deliver- able.
- Página 2 120V/60Hz Operator's Manual / Libro De Instrucciones / Manuel D’utilisation MODEL: 07100A READ THIS BOOK CAUTION: Read the Operator's Manual before using the appliance. This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your Clarke American Sanders machine could result in injury to you or to other personnel;...
-
Página 3: Tabla De Contenido
CONTENTS OF THIS BOOK Operator Safety Instructions ....................5 Machine Introduction ......................6 Machine Specifications ....................11 How To Prepare the Machine for Operation ............... 12 How to Install the Sandpaper ..................12 Sanding Cuts and Sandpaper ..................12 How to Install the Brush or Pad Driver ................ 16 How to Adjust the Handle ................... - Página 4 Todas las indicaciones de dirección dadas en este libro están dadas desde la posición del operador en la parte de atrás de la máquina. Puede Ud. conseguir libros suplementarios dirigiéndose a su distribuidor Clarke American Sanders. INDICE Instrucciones de seguridad para el operador ................7 Presentación de la máquina ....................
- Página 5 Toutes les indications de direction figurant dans ce manuel sont visualisées depuis la position du conducteur, à l’arrière de la machine. Pour toute commande de manuels, adressez-vous à votre revendeur Clarke American Sanders. INDEX Consignes de sécurité pour l’opérateur ................9 Présentation de la machine ....................
-
Página 6: Operator Safety Instructions
OPERATOR SAFETY INSTRUCTIONS WARNING AVERTISSEMENT ADVERTENCIA DANGER means: Severe bodily injury or death can occur to you or other personnel if the DANGER statements found on this machine or in this Owner's Manual are ignored or are not adhered to. Read and observe all DANGER statements found in this Owner's Manual and on your machine. -
Página 7: Machine Introduction
OPERATOR SAFETY INSTRUCTIONS (cont.) WARNING: Operating a machine without observing all labels and instructional information could result in injury or damage. Read all machine labels before attempting to operate. Make sure all of the labels and instructional information are attached or fastened to the machine. Get replacement labels and decals from your authorized distributor. -
Página 8: Instrucciones Para La Seguridad Del Operador Warning
INSTRUCCIONES PARA LA SEGURIDAD DEL OPERADOR WARNING AVERTISSEMENT ¡ AVISO ! ¡ PELIGRO ! : Si no sigue la indicación PELIGRO, se pueden causar lesiones graves, incluso mortales. Lea y siga todas las indicaciones PELIGRO que se encuentran en el libro y en la máquina. ¡... -
Página 9: Presentacion De La Maquina
Compruebe que todos los adhesivos y las instrucciones estén colocados en los sitios previstos. Si es preciso, haga un nuevo pedido a su distribuidor Clarke American Sanders. ¡ AVISO ! No use la máquina como escabel o mueble. Corre el peligro de causar lesiones o daños materiales. -
Página 10: Consignes De Sécurité Pour L'oPérateur
INSTRUCTIONS POUR LA SECURITE DE L’OPERATEUR WARNING AVERTISSEMENT ¡ AVISO ! ! DANGER ! Le non-respect des consignes précédées du mot DANGER peut occasionner des blessures graves, voire entraîner la mort. Lisez et respectez toutes les consignes DAN- GER figurant dans ce manuel et sur la machine. AVERTISSEMENT Le non-respect des consignes AVERTISSEMENT peut entraîner des blessures pour l’opérateur ou d’autres membres du personnel et/ou occasionner des dégâts matériels. -
Página 11: Presentation De La Machine
Vérifiez que tous les auto-collants et les instructions sont positionnés aux endroits requis . Au besoin, recommandez-en chez votre revendeur Clarke American Sanders. AVERTISSEMENT Ne pas utiliser cette machine comme escabeau ou comme meuble. Risque de blessure ou de dégât matériel. -
Página 12: Machine Specifications
Machine Specifications Model Sander 1600 Code Number 07100A Voltage (Volts) Frequency (Hz) Current (Amps) Power (hp) Pad Diameter 15.75 Pad Speed (rpm) Cord Length (feet) Weight (pounds) Modelo Sander 1600 Número de código 07100A Tensión (V) Frecuencia (Hz) Corriente (A) Potencia (hp) Diámetro del disco... -
Página 13: How To Prepare The Machine For Operation
HOW TO PREPARE THE MACHINE FOR OPERATION WARNING: Always remove the electrical plug from the electrical outlet before installing or changing the sandpaper. How To Install The Sandpaper To install the sandpaper, follow this procedure: 1. Put the handle in the vertical position. Figure 1 2. -
Página 14: Préparation De La Machine Avant La Mise En Service
PREPARATION DE LA MACHINE PREPARACION DE LA MAQUINA AVANT LA MISE EN SERVICE PARA TRABAJAR ADVERTENCIA: Antes de instalar o cambiar ATTENTION: Débrancer toujours la prise de la el papel abrasivo, desconecte siempre el enchufe de source d'alimentation électrique avant d'installer la toma de corriente. - Página 15 HOW TO PREPARE THE MACHINE FOR OPERATION (cont.) Standard Grade Professional Grade Grain Part #/Qty Part #/Qty 945566/25 945342/25 12 grit For removing gross imperfections and restore evenness 945567/25 945343/25 16 grit to old flooring. To remove build-up of paints and varnishes. 945568/25 945344/25 20 grit...
- Página 16 Grado estándar Grado profesional Grano Empleo Sólo parte # Sólo parte # 945566/25 945342/25 grano 12 Para eliminar imperfecciones grandes y nivelar suelos usados. 945567/25 945343/25 grano 16 Para quitar capas de pintura y barniz 945568/25 945344/25 grano 20 945569/50 grano 24 945570/50 grano 30...
-
Página 17: How To Install The Brush Or Pad Driver
HOW TO PREPARE THE MACHINE FOR OPERATION WARNING: Always remove the electrical plug from the electrical outlet before installing or changing the pad or brush. How To Install The Brush Or Pad Driver To install the brush or pad driver, follow this procedure: 1. -
Página 18: Installation De La Brosse Ou Du Porte-Disque
PREPARATION DE LA MACHINE PREPARACION DE LA MAQUINA AVANT LA MISE EN SERVICE PARA TRABAJAR AVERTISSEMENT: Débranchez toujours la AVISO : Desconecte siempre el enchufe fiche de la prise réseau de la caja de enchufe conectada avant d’installer ou de con la red antes de instalar o changer le disque ou la cambiar el disco o el cepillo. -
Página 19: Instructions For Connection To Power Supply & Elect. Ground, 120V
120 VOLT MACHINES Instructions for connection to the power supply and the electrical ground. This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electrical shock. -
Página 20: Instructions Pour Le Raccordement Au Réseau 120V
MAQUINAS 120 V. MACHINES 120 V. INSTRUCCIONES PARA LA CONEXION ELECTRICA INSTRUCTIONS POUR LE RACCORDEMENT DE LA MAQUINA ELECTRIQUE Cette machine doit être mise à la terre. En cas de La máquina debe ser puesta a tierra. En caso de mal dysfonctionnement ou de panne, le fil de terre funcionamiento o de avería, el hilo de tierra es un constitue un chemin de moindre résistance qui... -
Página 21: How To Operate The Machine
MAINTENANCE WARNING: Maintenance must be done by authorized personnel only. Maintenance Instructions Return the machine to a Clarke American Sanders Authorized Service Location every 12 months for main- tenance inspections. ® -20 - FORM NO. 70202B Clarke... -
Página 22: Funcionamiento De La Maquina
Clarke American Sanders Instructions pour l’entretien para ser comprobada. Tous les 12 mois, la machine doit être renvoyée dans un centre technique agréé Clarke American Sanders , pour vérification. ® Clarke American Sanders Operator's Manual - Sander 1600 120V... - Página 23 NOTES ® -22 - FORM NO. 70202B Clarke American Sanders Operator's Manual - Sander 1600 120V...
- Página 24 Sander 1600 Sander 1600 Sander 1600 Sander 1600 Sander 1600 120V/60Hz 120V/60Hz 120V/60Hz 120V/60Hz 120V/60Hz Section II Parts and Service Manual (70202B) ® Clarke American Sanders Operator's Manual - Sander 1600 120V FORM NO. 70202B - 23 -...
-
Página 25: Maintenance
WARNING: Maintenance must be done by authorized personnel only. CAUTION: Keep all adjustments according to specifications. Maintenance Instructions Return the machine to a Clarke American Sanders Authorized Service Location every 12 months for main- tenance inspections. Switches WARNING: All electrical repairs must be done by authorized personnel only. -
Página 26: Entretien
Instrucciones para el mantenimiento Tous les 12 mois, la machine doit être renvoyée dans Cada 12 meses, la máquina debe ser mandada a un un centre technique agréé Clarke American Sanders , centro técnico autorizado Clarke American Sanders pour vérification. -
Página 27: Assembly Drawing
Sander 1600 Assembly Drawing 3/10 47 2 65 66 56 ® -26 - FORM NO. 70202B Clarke American Sanders Operator's Manual - Sander 1600 120V... -
Página 28: Assembly Parts List
Sander 1600 Assembly Drawing Parts List 3/10 Ref. Part # Description Qty. Ref. Part # Description Qty. 61120A Bracket, Stop Switch 962289 Screw, ¼-20 x 962727 Screw, 8-32 x ½ 24508A Cover, Switch Front 56109699 Cam Assy With Grip NOTE 1 50514A Lever, Switch 41311A Capacitor, Run 508340 Spring, Extension... -
Página 29: Gearbox Assembly Drawing & Parts List
Sander 1600 Gearbox Assembly and Parts List Part No. Description Qty. 962966 Screw, Socket Hd. Cap 980650 Washer, Lock 56922A Retainer, Bearing 902606 Bearing, Ball 58520A Spacer, Sleeve Endshield 962794 Screw 10-24" x 1" 54858A Cover, Housing 902736 Bearing 58314A Retainer 442473 Coupling... -
Página 30: Wiring Diagrams
Sander 1600 Wiring Schematic 6/00 Sander 1600 / 1600DC Motor Schematic 3/00 WARNING: All electrical repairs must be performed by qualified personnel only. Clarke ® American Sanders Operator's Manual - Sander 1600 120V FORM NO. 70202B - 29 -... - Página 31 NOTES...
- Página 33 14600 21st Avenue North Plymouth, MN 55447-3408 www.clarkeus.com Phone: 800-253-0367 Fax: 800-825-2753 ©2010 Nilfi sk-Advance, Inc. A Nilfi sk-Advance Brand...