INFORAD M-1 Guía Rápida De Utilización página 5

2 • Downloading the INFORAD MANAGER PC application
INFORAD MANAGER enables you to a) modify certain parameters such as i) the
approach and escape distance, ii) insert your own danger zones, iii) determine whether
you have the lastest version of the speed camera database and b) to register your device
to receive database updates. It will also enable you to run diagnostic tests to ensure your
device is functioning properly.
Go to the web site www.gpsinforad.com now and download INFORAD MANAGER.
Once downloaded to your PC's hard disk, install INFORAD MANAGER by clicking on the
downloaded file and consult the help files on the main menu. The installation process will
prompt you when to connect the INFORAD processor (2) to your PC via the supplied USB
cable (7). During this installation phase you will need to register the serial number of your
device from the one-years free access to database updates.
N.B. Please do not connect your INFORAD USB cable (7) to your PC before being
3 • Installing INFORAD on your motor bike
INFORAD has been designed to enable maximum fitting flexibility on your vehicle. The
docking station (1) and the fitted cables (3,4,5) are designed to remain permanently
fitted. The INFORAD processor (2) detaches for PC database update and reconfiguring
purposes.
(a) Installing the docking station:
The docking station (1) can be fitted by either tightening the supplied plastic
strips (6), with screws (not supplied) or self-adhesive strip (not supplied). Be
sure to choose a spot that will avoid accidents should the docking station come
loose. We advise you consider the compartment beneath the rider's seat.
If you don't wish to mount the docking station permanently, you may use a
self-adhesive strip. We strongly advise that you mount the device some where
where vibrations won't shake it loose. We strongly recommend you avoid
adhesives strips if you decide to attach the docking station to the outside of
your bike.
The following diagramme shows the various ways to mount the device :
(1,3,4) : by tightening the plastic strips
(2) : with screws
prompted by the installation software.
© INFORAD Ltd 2005 - Quick Start guide v1.2
GB
3