Adjust Doors - JENN-AIR JS42SEFXDB Manual De Instalación

Ocultar thumbs Ver también para JS42SEFXDB:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Top Grille Panel
1. Grasp both ends of the top grille.
2. Push straight up, then pull straight out. Place the top grille
panel-side down on a soft working surface.
B
A. Top grille
B. Cabinet side trim
3. Remove one end cap by loosening the nuts and sliding off the
end cap.
A. Bottom rail
B. Nuts
4. Slide the backer panel into the top grille channel and reattach
the end cap.
A. Backer panel
5. Replace the top grille in the cabinet side trims and pull the
panel down slightly to lock it into place.
B
A. Top grille
B. Cabinet side trim
A
B
C. End cap
D. Top rail
A
B

Adjust Doors

Door Height Adjustment
Use the following steps to adjust the door height, up or down,
after the doors have been leveled.
1. Open the freezer or refrigerator door. Locate the bottom hinge
and remove the door stop screw.
Euro-Style and Pro-Style
Remove the door stop screw from the bottom side of the
hinge with a ³⁄₈" open end wrench.
A
A. Bushing
B. Door stop screw
C. Locking plate
Overlay Style
Remove the two door stop screws: one from the bottom side
using a ³⁄₈" open end wrench and one from the top side using
a ⁵⁄₃₂" Allen wrench.
A
A. Door stop screw from bottom
B. Door stop screw from top (110°)
2. Remove the locking plate as shown.
®
Styles
B
C
B
21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Js48efxdbJs42ppfxdbJs48ppfxdbJs42cxfxdbJs48cxfxdbJs42sedudb ... Mostrar todo

Tabla de contenido