Xerox Phaser 6180MFP Guía De Configuración De Funciones página 11

Setting Up the Printer Features Connecting over Ethernet (Network)
Step 6: Setting Up the Fax
1. Verify that the fax phone line is connected.
2. From the control panel:
a. Press the System button.
b. Select the Admin Menu.
c. Select the Fax Settings.
d. Select your country.
e. Enter your fax number (this number prints on the header of the
faxes).
You can now use the following steps to enter addresses using
CentreWare IS.
Step 7: Using CentreWare IS to Add Individual and Group
Addresses to Your Fax
1. Launch your web browser.
2. Enter your printer's IP address in the browser's Address field. You
will see the printer's home page. For instructions on how to obtain
the Printer IP address, see Frequently Asked Questions on page 15.
3. From the printer's home page, click Address Book.
4. In the Address Book, under Fax Phone Book, click Individual
Directory.
5. In the Directory Listing, click the Add button of any entry that is
not in use. The first ten entries in the Address Book correspond to
the ten one touch buttons found on the left navigation panel of the
control panel.
6. Enter the information for the individual.
7. Click the Save Changes button to create the new address. The new
individual is saved to the printer's address book.
Phaser® 6180MFP Multifunction Printer
EN - 9