Prince Castle Channel Serie Manual De Instrucciones página 3

figure 2
3. To change the program time for the selected
channel, use the SCAN/UP Arrow or the SCAN/
DOWN Arrow button.
IMPORTANT : To change from Minutes and Seconds
M:S to Hours and Minutes H:M. Press and hold the
SCAN/UP Button. When the display reaches 59:59 it
will automatically change to 1:00 Hour and the LED
will switch from M:S to H:M. The program value for
the H:M indicator is from 1:00 hour to 17 hours: 59
minutes. See figures 3 and 4.
figure 3
figure 4
4. To program another channel, press the desired
channel button. Repeat programming procedures
in steps 2 and 3. See figure 5.
figure 5
5. When finished programming each desired
channel, momentarily press the PRINCE
CASTLE logo to end the Program Mode. This
saves the program changes you have made for all
channels. See figure 6.
figure 6
6. You can change the sound level of the alarm in
RUN MODE. Press and hold the PRINCE
CASTLE logo; then, within six seconds, press
either the SCAN UP Arrow button or the SCAN
DOWN Arrow button. The SCAN UP Arrow button
adjusts the sound level to the louder alarm, and
the SCAN DOWN Arrow button adjusts the sound
level to the lower alarm. See figure 7.
figure 7
3 741-500FGISrevA