Oven Light; Oven Doors - GE CT9570 Manual Del Propietário

Oven Light

Oven Light Replacement
SHOCK OR BURN HAZARD:
WARNING
oven at the main fuse or circuit breaker panel. Failure to do so may result in electric shock or burn.
BURN HAZARD: The glass cover and bulb should be removed when cool. Touching hot glass with
CAUTION
bare hands or a damp cloth can cause burns.
panel.
2. Remove oven racks.
3. Slide a flat blade screwdriver between the housing
and the glass light cover.
4. Support the glass light cover with two fingers to
prevent the cover from falling to the bottom of the
5. Gently twist the screwdriver blade to loosen the glass
light cover.
6. Remove the glass light cover.

Oven Doors

Upper Oven Door Center Seals
cannot be removed with warm sudsy water and a soft
cloth, use a stainless steel cleaner that removes heat
discoloration and/or tarnishing.
commercial oven cleaners or sharp objects to try and
clean the center seals since this can damage these
door parts.
Upper Oven Doors
The French oven doors are not removable or consumer serviceable. Please schedule service on-line at
or call GE Appliances at 800.GE.CARES (800.432.2737) during normal business hours.
16
www.geappliances.com/service_and_support/
7. Remove the bulb by firmly grasping and sliding the
bulb straight out until the two prongs have cleared the
ceramic holder.
lights. Grasp the replacement bulb with a clean towel
or facial tissue with the prongs facing down. Align the
two prongs in the ceramic holder, pressing gently until
the bulb is securely in the ceramic socket.
9. Slide the protective lens into the holder and push until
the clips snap into the housing.
10. Reconnect power.
49-80788