Carrier Comfort Serie Manual Del Usuario página 9

Programming the Control
Here's how to connect your time periods with your settings.
1. Open the lid.
2. Press the days ( ) button at the bottom of the
thermostat. You will see 1 to 7 flashing on the display.
3. Select one of the options (1 to 7 , 1 to 5 , 6 to 7 or
individual day : 1, 2, 3, 4, 5, 6, 7) by pressing the days
( ) button until you get your desired option. Select
1 to 7 if your individual day schedules are same.
4. When you have selected one of the options (1 to 7, 1
to 5, 6 to 7 or individual day: 1, 2, 3, 4, 5, 6, 7), press the
period ( ) button at the bottom of the thermostat.
P1 will flash on the display.
5. Select the desired zone by pressing the zone (
button repeatedly.
6. To change the hours in P1, press the start time (
button at the bottom of the screen.
7. You will see the hours in 6:00 flashing on the screen.
Press the up or down button and stop on the desired
time.
8. To change the minutes, press start time (
You will see the minutes in 6:00 flashing on the screen.
Press the up or down button and stop on the desired
time.
9. The "stop time" for period 1 (P1) is also the "start time"
for period 2 (P2). Use the instructions in the next step
to change the start time for period 2.
10. Press the Touch 'N' Go button – home (
( ) or sleep (
period 1 (P1) from the row of buttons just below the
display. You will see triangle icon (
button selected. This tells the thermostat whether you
are home, away, or sleep during P1. The thermostat
will use the heating and cooling temperature settings
you've selected for that Touch 'N' Go button. For
example, if your heating temperature setting for
home is 23 °C, the thermostat will keep the heat at 23
during P1.
11. For zone 1 and zone 2: press the mode (M) button on
the left side of the display.
) is displayed, Zone mode is OFF,
otherwise is ON.
12. For zone 1: press the hold (
of the display.
Mode is ON, otherwise is OFF.
13. For zone 3: press the hold (
of the display.
heater is enabled, otherwise is disabled.
)
) button.
), away
) – you want to use during
) above the
) button on the left side
) is displayed, Silent
) button on the left side
) is displayed, booster
)
9