PERSONAL SCALE
Introduction
To get the most out of your new personal
scale, please read through these
instructions and the attached safety
instructions before use. Please also save
the instructions in case you need to refer to
them at a later date.
Technical data
Max. load:
Accuracy:
Automatic switch-off
Battery:
Special safety instructions
Do not expose the electronics in the
personal scale to water or damp.
Do not subject the glass plate on the
personal scale to heavy blows or knocks.
Inserting the battery
Open the battery compartment on the
base of the personal scale. Insert a CR2032
battery into the scale and then replace the
battery cover.
When replacing a battery, dispose of the
used battery in accordance with local
regulations.
10
180 kg
+/- 100 g
1 × CR2032 (supplied)
Use
Place the personal scale on a solid, even
surface – tiled � ooring for example. The
personal scale will not function properly if it
is used on a soft surface, such as a carpet.
Place one foot lightly onto the glass plate
on the personal scale.
The display will be activated. Wait until you
see "0.0 kg" on the display.
Step onto the personal scale with both feet
and stand still.
After a moment, your weight reading will be
shown on the display.
Step down off the scale.
The personal scale will switch off
automatically after a few seconds.