Connection And Setup - Grandin LD19CHD106 CI Manual De Instrucciones

English

CONNECTION AND SETUP

Cable Installation
Please read the relevant content in "Notice for Maintenance and Safety" carefully
before the installation and use.
Take out the TV from the package and put it in a drafty and flat place.
1.
NOTE :
When you plug or unplug the TV, computer or other equipments, you must make sure that the AC power
has been already shut down; when unplugging the power cable or signal cable, please hold the plug
(the insulated part), do not draw the body of the cable.
The RF output terminal can be connected with the RF input port of the TV.
2.
The output AV terminal of DVD can be connected with the AV input port of the
3.
TV through AV cable.
NOTE :
Component and AV can not be used at same time for they share of one audio channel.
The output COMPONENT(YPbPr) terminal of DVD can be connected with the
4.
COMPONENT(YPbPr) input port of the TV through AV cable.
Connect one end of the VGA cable with the VGA port on computer, connect the
5.
other end of the VGA cable with the VGA port on the TV, and tighten the bolts
clockwise on the each end of VGA cable.
NOTE :
While connecting the 15-pin VGA, please do not insert the plug overexertedly, for fear the pin might be
broken.
Connect one end of the HDMI cable with HDMI output port, connect the other
6.
end of the HDMI cable with the HDMI port on the TV.
NOTE :
While connecting the HDMI, please aim at carefully, do not insert overexertedly, for fear the pin might
be broken.
Connect SCART socket input or output from an external device to these jacks.
7.
Sending the TV's audio signal to external audio equipment via the Digital Audio
8.
Output port.
Check and make sure that all AV cables are connected with the corresponding
9.
ports correctly.
Connect the AC power cable with 100-240V~ power supply.
10.
NOTE :
• The range of power input for the TV is 100-240V~ 50/60Hz, do not connect
the TV power input port with the AC power out of the above range.
• Please hold the insulated part of the plug when you are unplugging the power
cable, do not touch directly the metallic part of the cable.
GB-16