Using Your Coffee Maker - Gastrorag CM-1290B Manual De Instrucciones

EN

Using your coffee maker

BEFORE THE FIRST USE
1. Unpack the appliance and place it on a durable 25-35" high
stand with a flat horizontal surface.
2. Open the water tank lid and fill the tank with cold drinking
water. The water level must not exceed the maximum level
indicated on the water gauge. Do not fill the water tank with
any other liquids for brewing operations.
3. Brew water for several times without coffee powder, then pour
it out. Clean and dry all detachable parts thoroughly according
to the "CLEANING AND MAINTENANCE" section.
USING YOUR COFFEE MAKER
1. Open the water tank lid and fill the tank with drinking water. The
water level should not exceed MAX level indicated on the water
gauge.
2. Place the funnel into the funnel support, make sure it is
positioned correctly, otherwise the water tank lid can not be
closed. Place a nylon filter in the funnel.
3. Add ground coffee into the filter. Usually 1 measuring spoon
of coffee powder per cup is enough, but you may adjust the
amount of coffee according to personal taste. Close the water
tank lid completely.
4. Put the glass carafe onto the warming plate.
5. Plug the power cord into the outlet. If you want to adjust
coffee strength, press "Strength" button once. The "Strength"
indicator will illuminate red and the appliance will brew strong
coffee. If you do not want to adjust the coffee strength, just
follow the steps below to brew normal coffee.
NOTE: Press the "Strength" button again if you want to cancel
strong coffee brewing.
8