ZIGOR SOLAR XTR3 Manual De Operación página 87

Operating Manual
Warning 12
Alarm 13
Information 14
Warning 15
Warning 16
Warning 17
Warning 18
Alarm 19
Information 20
Information 21
© ZIGOR
Power limitation in
Derating accordance with the working
temperature.
DC current outside inverter
DC current
limits.
Relay The output relay switches
The system detects a grid
Grid dip
dip.
Low Vgrid Input AC voltage value low.
High Vgrid Input AC voltage value high.
The PV Inverter phase
Frequency Margin cannot be in phase with the
The system detects a leak in
I Leak
Remote start System remote start.
Stop
1. Try reducing the atmospheric
temperature.
2. Move the PV Inverter to a
cooler place.
3. If the error code reappears,
seek the help to the local
distributor.
Wait until the grid returns
Disconnect the AC circuit breaker.
Then check the configuration of
the peripheral AC system and the
grid conditions. If the failure
reoccurs, ask the local distributor
for help.
Disconnect the AC circuit breaker.
Then check the configuration of
the peripheral AC system and the
grid conditions. If the failure
grid.
reoccurs, ask the local distributor
for help.
1. Disconnect ALL the PV (+) or
PV (-)
2. Wait for a few seconds.
3. After the LCD turns off,
the DC power.
reconnect or check again.
4. If the same error occurs again,
contact the local distributor.
System stop
ZIGOR SOLAR XTR3
39