Introduction; Technical Data - ESAB Origo 4004i MV Manual De Instrucciones

2

INTRODUCTION

The Origo 4004 iMV are power sources
technology with digital control (CANbus), high
conventional sources, to MIG / MAG, TIG and
steels, alloy steels, stainless steels, cast iron, aluminum and its alloys, copper and
bronze Excellent weldability with mixtures and CO . .
The Mig 4004i MV version doesn t have the control panel mounted on the power source.
All adjustments and selections must be made in the panel MA24 mounted in the wire
feeder. The OrigoMig 4004i MV A44 version has the panel and has several features like:
select: the type of electrode (1), variable inductance, ArcForce and Hot-Start.
It has quick connectors for output cables and gas hose, requiring no tools to accomplish
these connections.
After the time of 6.5 minutes without welding operation, the unit switches to standby
mode (standby) by reducing energy consumption.
(1) The feature selection cellulosic electrode (although it can be enabled on this
machine) is available only in the version of 300A.The model 300A is not commercialized
in Brazil.
3

TECHNICAL DATA

Power source
Input Voltage*
Slow fuse
Input cable
Permissible load at 60% duty cycle
Permissible load at 100% duty cycle
Current range
MIG/MAG
MMA
TIG
Open circuit voltage
Power factor (maximum current)
Efficiency at maximum current
Control voltage
Dimensions (only the power source), W x L x H
Dimensions (with the cooling unit), W x L x H
Weight (without cables)
Operation temperature
Enclosure class
Application class
* Equipment only works in three-phase networks.
multiprocess welding, designed with inverter
ratio power weight when compared to /
MMA process
2
220 to440 VAC, 3~, 50/60 Hz
for 220 VCA
20 - 350 A
16 - 350 A
4 - 350 A
- 31 -
. Allow welding of carbon
Origo 4004 iMV
25-50 A
2
4 x 10 mm
400 A / 36 V
300 A / 32 V
for 380 and 440 VCA
20 - 400 A
16 - 400 A
4 - 400 A
60 V
0,95
88 %
42 Vac
610 x 250 x 445 mm
610 x 250 x 675 mm
48 Kg
o
-10 a + 40 C
IP 23
S