TILLER CONSOLE
The tiller console and lower tiller house all of the controls needed to drive your PMV, including the LCD
control panel, throttle control levers, key switch, and the throttle control lever switch. See figure 1.
PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller
console does become exposed to moisture, do not attempt to operate your PMV until the
tiller console has dried thoroughly.
Horn Buttons
These buttons activate a warning horn. Your
PMV must be powered up for the horn to be
operational. Do not hesitate to use the warning
horn when doing so may prevent accident or
injury.
Turn Signal Buttons
Press the appropriate turn signal button once
to activate it. The turn signal will flash on the
LCD screen.
Press the same signal button to turn it off.
NOTE: The turn signals are timed to shut off
after 15 seconds. A warning beep will sound as
long as the turn signal is on. See figure 3 for
volume control.
Lights Button
Press the lights button once to activate the
lighting system. The light symbol will be
shown on the LCD screen.
Press the lights button again to turn the
lighting system off.
WARNING!
required to use their lights
when
restricted—day or night.
LCD Screen and control panel settings
The LCD control panel offers easily intuited
feedback information via the LCD screen. See
figure 1. The LCD screen is also used during
the set-up (activation) of the various control
panel settings.
Hazard Lights Button
This button activates the 4-way yellow flashers
on your PMV.
Press the button once to turn on the flashers.
Press the button again to turn off the flashers.
PMV Series
I I . Y O U R P M V
PMV
users
are
visibility
is
IDENTIFICATION KEY
1. HORN BUTTON
2. TURN SIGNAL BUTTONS
3. LIGHTS BUTTON
4. LCD SCREEN
5. SET BUTTON
6. HAZARD LIGHTS BUTTON 11. THROTTLE CONTROL
7. MODE BUTTON
12a
12b
12
5
4
3
2
1
11
Figure 1. LCD Control Panel
8. HI-LOW BUTTON
9. SPEED ADJUSTMENT
(INCREASE)
10. SPEED ADJUSTMENT
(DECREASE)
12. HANDBRAKE
12c
6
7
8
9
10
1
2
7