Pride Mobility PMV Serie Manual Del Propietário página 8

NOTE: The 4-way flashers will flash and a warning beep will sound as long as the hazard lights are on.
See figure 3 for volume control.
Mode Button
Use the mode button to scroll between the odometer, tripometer, temperature, and clock.
High-Low Button
This button toggles the PMV's speed between HIGH and LOW.
 Press the High-Low button once to set the speed adjustment to high. The High-Low indicator will
display on the LCD screen. See figure 2. Using this setting in conjunction with the speed adjustment
buttons will allow the PMV to achieve speeds up to the maximum preprogrammed speed for the PMV.
 Press the High-Low button again to set the speed adjustment to Low. The High-Low indicator will not
display on the LCD screen. Using this setting in conjunction with the speed adjustment buttons will
allow the PMV to achieve speeds up to the half the maximum preprogrammed speed for the PMV.
Speed Adjustment Buttons
These adjustment buttons enable you to pre-select and limit your PMV's speed. This is indicated by the
maximum speed indicator on the LCD screen. See figure 2.
Press the image of the tortoise to decrease the speed of the PMV.
Press the image of the rabbit to increase the speed of the PMV.
NOTE: The more bars shown on the maximum speed indicator, the faster your pre-selected maximum
speed will be. See figure 2.
Throttle Control Levers
These levers allow you to control the forward speed and the reverse speed of your PMV up to the
maximum speed you preset with the speed adjustment buttons. A throttle control lever is located on the
underside of the left and right side of the tiller handle. See Figure 1.
To Move Forward:
 Squeeze the rear part of the throttle control lever.
To Move Rearward:
 Squeeze the front part of the throttle control lever.
Release the throttle control lever and allow your PMV to come to a complete stop before engaging the
other side of the lever. When the throttle control lever is completely released, it automatically returns to
the center "stop" position and engages your PMV's brakes.
Handbrake Lever
This lever provides you with emergency stopping power. When in motion, release the throttle control lever
and gently squeeze the handbrake lever to come to a stop.
WARNING! The handbrake is intended for use as an emergency brake and/or parking
brake only.
To engage the parking brake, squeeze the handbrake lever, then press down on the top of the handbrake
mechanism. A red bar will indicate that the PMV parking brake is locked. See figure 1. Tap the handbrake
lever to release the parking brake when ready to resume movement.
8
I I . Y O U R P M V
PMV Series