Removing r
1. Turn ON the main water supply.
2. Press the Water button and push the dispenser pad.
Refer to 'Checking the control panel' in the manual (page 22)
3. Flush 3 gallons of water thr
(Flush approximately 6 minutes.)
This will clean the water supply system and remove air from the lines.
4.
5. Open the refrigerator door and make sure there are no water leaks coming
fr
.
om the water dispenser. This is due to air
getting into the line. It should pose no problem to operation.
equired in some households.
Ice
Water
setting up _21