Installation Using The Screw Holes On The Side Of This Product - Pioneer SPH-DA120 Manual Del Usuario

Section
03 Installation
1 Dashboard
2 Holder
3 Install this product into the holder.
1
1 Dashboard
! Do not squeeze this product into the holder.
It may damage the front panel.
24
Engb
4 Attach the trim ring.
1 Trim ring
2 Groove
Attach the trim ring with the side with a
groove facing downward.
Installation using the screw
holes on the side of this product
% Fastening this product to the factory
radio-mounting bracket.
Position this product so that its screw holes
are aligned with the screw holes of the brack-
et, and tighten the screws at three locations
on each side.
Use either the truss head screws (5 mm ×
8 mm) or flush surface screws (5 mm ×
9 mm), depending on the shape of the brack-
et's screw holes.
1
2