Scale Removal; Storage - Silvercrest SKAK 1000 A1 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

• Rinse the filter holder 6 under running water
and then dry it.
• Replace the filter holder 6 back into the coffee
machine:
- Hold the filter holder 6 at a slight angle and
slide the top bracket as far as possible into the
upper recess of the machine.
- Now hold it upright, so that the lower bracket is
positioned over the lower recess of the machine.
- Lower the filter holder 6 so that the lower
bracket engages in the recess.
• Close the filter holder 6.
• Clean the measuring spoon in mild soapy water
and rinse it with clean water.

Scale removal

The mineral content (hardness) in the water causes,
over a period of time, a calcification of the coffee
machine. This calcification impairs the appliance in
its function and diminishes the quality of the brewed
filter coffee.
Enquire at your local waterworks about the
hardness level of your mains water. The need for
decalcification comes early in hard water areas,
somewhat later in soft water areas. Use a decal-
cifier designed for household appliances and
pay heed to the usage instructions.
1. Switch the coffee machine off and allow it to
cool down completely.
2. Place the scale removal product in the water
tank 2.
3. Fill the water tank with water up to the 10-cup
marking.
4. Place the glass jug on the keep-warm plate 4.
5. Switch the coffee machine on with the On/Off
switch 5.
6. Wait until the brewing process is complete.
Switch the coffee machine off and disconnect
the plug from the mains power socket.
7. Carefully rinse the glass jug with mains water.
Fill the water tank 2 with mains water. Empty it
again, in that you gently tip the appliance over
the sink.
8. To finish, carry out two brewing processes with
just mains water, as described in the section
"Before the first usage".
When completed, you can continue to use the coffee
machine.

Storage

If you do not intend to use the appliance for an
extended period, slide the power cable into the
cable storage compartment 3 at the rear of the
coffee machine. Secure the plug in the holes next to
the cable storage compartment 3.
Store the appliance at a clean and dry location.
- 30 -

Publicidad

Tabla de contenido
loading

Tabla de contenido