Diamond PPF/18 Manual De Instrucciones página 29

SWITCHING ON / SWITCHING OFF
The impulse switching on and switching off of the controls panel and the display is possible only with a voluntary action on
the control device foreseen with this aim: button white or black "
FUNCTIONING TIME
Before the machine starting the functioning time setting is possible only with a voluntary action on the control device
foreseen with this aim: button white "
STARTING
The machine impulse starting is possible, after the switching on, only with a voluntary action on the control device foreseen
for this aim: white button "I" for the machine starting control.
STOP
For the stop control of the machine work function, without have a display complete switching off, activate the black button
"O".
MAINTAINED ACTION STARTING
The machine maintained action starting is possible only with a voluntary action on the control device foreseen for this aim:
white button " ". The maintained action control is used in the 10-18 Kg versions for the product unloading operations.
During the button releasing the machine stops.
VOLTAGE LACKING
In case of electric feeding breaking or if the machine is disconnected from the electric net, this last one will be able to be
restarted only following the starting function, after the electric feeding back or the reconnection to the electric net.
TRANSPARENT SUPERIOR COVER OPENING AND LATERAL DISCHARGE DOOR
Lifting the superior cover or the lateral discharge door (if any) the machine stops immediately for the safety micro switch
functioning. The machine can be restarted only closing and blocking the superior cover and the lateral discharge door and
following successively the starting function.
CONTROLS AND VERIFICATIONS BEFORE STARTING
VERIFICATION / CONTROL
Check that:
the machine is placed above a well with drain for the
water harvest;
the drawer with the filter for the dross harvest is
inserted correctly;
if present the lateral fall water discharge collector is
connected to the discharge pipe with filter for the
dross harvest and blocked with clamp.
Check the integrity:
of the fixed protections
of the transparent superior cover
of the lateral discharge door (10-18 Kg versions)
of the charge mouth
of the abrasive cloth
of the machine body
Check the absence:
on the machine, inside the basin and in
correspondence of the discharge mouth (if any) in
the product leakage zone of extraneous objects.
Check that:
the connection to the drinking water plant is
performed correctly as prescribed;
the drinking water tap is opened;
water drops are absent that leakage from the plastic
case inferior zone, from the superior cover or from
the inferior door.
Check the cleaning:
of the machine internal parts;
of the internal abrasive cloth, of the flat, of the
transparent superior cover internal part, of the
discharge door, of the discharge mouth;
of the drinking water injection nozzle inside the
basin;
of the machine external surface
" to increase the time, or the button white "
Visual check of the showed parts, to check the machine adequate
positioning, its parts and the correct connection to the discharge pipe.
In contrary case provide for what prescribed through the maintenance man.
All fixed protections, etc.., must perform the function for which have been
foreseen.
Indicated parts sight check to verify their integrity in their surface external
part.
The parts must be however changed at the first erosion signals or breaking
(cfr. Authorized Assistance Centre).
Sight control of the indicated parts, to check of objects or extraneous bodies
lacking as for example different tools, clothes, etc... and that there isn't
however the food product.
In case of presence, provide with their removal.
Visual check of the showed parts, to check the correct connection and the
absence of what showed.
In contrary case provide for what prescribed through the maintenance man.
All indicated parts surfaces, before the machine use must be checked
visually to verify their cleaning.
For the sight check of the internal part, open the superior cover.
In case of molds presence or other type of dirtiness, provide with the
cleaning procedure in accordance with the chapter 5 indications.
".
" to decrease the time.
MODALITY AND CHECKS
Pag. di
13 17