Maintenance And Service - Global Air NPA1 Serie Manual De Uso Y Cuidados

Maintenance and Service

Remark: Turn off the unit and pull out the plug before maintain or send the unit to service center.
1. Surface cleaning
Clean the unit surface wit h wet and soft cloth, but do not use chemical solvents such as alcohol or gasoline to
avoid damage to unit.
2. Filter cleaning
Clean the filter every two weeks, otherwise it would influence the unit function if filter clogged with dust.
2.1. How to clean filt er
1) Grip the filter handle and take it out gently in correct direction shown by the arrow.
Notes:

Use even force to take out the filter.

Filters at back panel at priority then filter at side panel, to avoid any twist or damage to filter.
2) Clean the filters gently in warm water (about 40℃) mixed with detergent then dry them in the shade.
Notes:

Do not squash the mesh.

Do not hit the mesh with sharp objects or brush.
2.2 Installation of the filter
Aim the end of the filter toward to slot then pus h it gently into slot in even force.
Special note:

Be sure to install the filters to side panel at first then install the filter into back panel.

Install the filter with opposite direction of removal.

Install the filter into place gently to avoid any damage to filter.
.
Filter Handle
Filter Handle
15
Filter Handle
Filter Handle