Adjusting The Volume; Creating The Channel List; Adding Or Deleting A Channel - Insignia NS-PDP72 Guia Del Usuario

Adjusting the volume

To adjust the volume:
• Press VOL+ or VOL– to increase or
decrease the volume.
• To mute the sound, press MUTE. To restore
the sound, press MUTE, VOL+, or VOL–.

Creating the channel list

When you press CH+ or CH–, your plasma TV
goes to the next or previous channel in the
channel list.
You should set up the channel list when you first
set up your plasma TV. You should update the
channel list when your antenna or cable
connection changes.
You can create the channel list automatically
from the EZ Scan menu, or you can create the
channel list manually.
You can still select a channel that is not in the
channel list by pressing the number buttons for a
channel.
Note
If you have turned on the Lock System, you need
to enter the password before you can create the
channel list.
Creating the channel list from the EZ Scan menu
When you scan from the EZ Scan menu, your
plasma TV scans for available channels in your
area and stores them in the channel list. Your
plasma TV skips any channels that have a weak
signal or no signal.
To create the channel list with EZ Scan:
1 Press MENU, then press
SETUP. The SETUP menu opens.
2 Press , then press
EZ Scan. The EZ Scan menu opens.
3 Press ENTER to start scanning for channels.
Note
Make sure that you let your plasma TV scan for
both ANTENNA and CABLE channels.
12
Creating the channel list manually
or to select

Adding or deleting a channel

or to select
www.insignia-products.com
Insignia NS-PDP42 42" Plasma TV-720P
When you manually create the channel list, you
add or delete the channels you want in the
channel list.
To manually create the channel list:
1 Press MENU, then press
SETUP. The SETUP menu opens.
2 Press , then press or
Scan.
3 Press , then press or
DTV, CATV, or CADTV.
4 Press , then press or
channel you want to add or delete.
5 Press ENTER to add or delete the channel.
6 Press EXIT to return to TV viewing or press
MENU to return to the previous menu.
After you create the channel list from the EZ
Scan menu, you can add a channel to or delete
a channel from the channel list.
To add or delete a channel:
1 Press MENU, then press
SETUP. The SETUP menu opens.
2 Press , then press or
Channel Edit.
or to select
to select Manual
to select TV,
to select the
or to select
to select