Pramac Powermate PMi1000 Manual Del Usuario página 44

-
5. Start the engine
Before starting the engine, cut off the load from the alternating current socket on
the engine.
Totally turn the valve to the "OPEN" position clockwise.
f)
Note: when transporting the engine, you should turn the ventilating pole of the
fuel-burning lid to the "CLOSE" position.
Note : in case of first use or in cold environment fasten the fuel-filling lid till the
ventilating pole indicates to OFF
Pull the piston rod to the end/top and then push it down 3-4 cycles/times. (This
will add pressure to the fuel system so the fuel can reach the carburetor quickly
to accelerate the starting of the generator)
1 – The ventilating pole of fuel-filling 2 – Switch of the engine
lid
44