Publicidad
Idiomas disponibles
Idiomas disponibles
CONFIGURING THE TRIPOD LIGHT
By raising and rotating the Extension Poles and unfolding and tilting the Light Head Assembly as described in the following
sections, your tripod light can be configured to provide ideal lighting for most projects. For example:
CAUTION: TO REDUCE THE RISK OF
INJURY TO PERSONS AND PROPERTY
DUE TO TIPPING: When extending the
Tripod Legs, raising the Extension Poles
and adjusting the Light Head Assembly,
the manufacturer recommends to
CENTER LOCK
always maintain the Center Lock Shaft
SHAFT
of the Light Head Assembly so that it
is facing either straight up over the
EXTENSION
Extension Pole Assembly or facing over
POLE
the center of one of the Tripod Legs (and
ASSEMBLY
never facing over the gap between
Tripod Legs).
TPL45S_ManualENSP_022414.indd 8-9
CENTER LOCK
SHAFT
TRIPOD LEG
8
Extending and Retracting the Light Stand Assembly
The Tripod Legs can be extended to allow the light to sit securely on the floor (or other flat, stable surface) or retracted to conserve
space when the unit is stored.
EXTENSION POLE ASSEMBLY
LOWER LATCH
TRIPOD LEGS (THREE TOTAL)
UNIT BASE
EXTENDING THE TRIPOD LEGS:
1.
Flip the Lower Latch outward to unlock the collapsed Tripod Legs.
LOWER LATCH
9
2/24/2014 7:56:29 PM
Publicidad
