Stanley FATMAX TPL45S Información De Servicio página 8

UNFOLDING AND FOLDING THE LIGHT PANELS
The three LED Light Panels can be unfolded or folded entirely or individually when attached to the light panel holder.
Unfolding the Light Head
1.
Press down and rotate Center
Lock clockwise about 90 degrees
to unlock the Light Head
Assembly.
2.
Unfold as many Light Panels as
desired.
Folding the Light Head
1.
Gently fold the Light Panel(s) back toward the center of the unit until all Light Panel Holders touch the Center Lock.
2.
Press down and rotate the Center Lock counterclockwise about 90
degrees to lock the Light Heads back in place.
TPL45S_ManualENSP_022414.indd 14-15
14
DETACHING AND ATTACHING THE LIGHT PANELS
The individual LED Light Panels can be detached from the Light Panel Holders for cordless use.
Detaching the Light Panel from the Light Panel Holder
1. Unlock the Light Head Assembly from the Centre Lock (press down and hold the Main Handle, and then gently rotate it
clockwise at about 90 degrees).
2. Press and hold the Lamp Release Button on the Light Panel.
3. Grasp the handle of Light Panel and then gently lift it out of the Light Panel Holder.
Attaching the Light Panel to the Light Panel Holder
1. Align the two Parallel Slots on the back of the Light Panel with the two Ribs of the Light Panel Holder.
LIGHT PANEL HOLDER
RIB
SLOT
2. Grasp the handle of Light Panel and then gently push it downward so the Ribs sit in the Slots.
READING THE BATTERY/CHARGE STATUS LED INDICATOR
The battery and charging status LED indicator is located on the front of each light panel. It lights or flashes in three colors to
indicate the following:
RIB
SLOT
LIGHT PANEL
15
2/24/2014 7:56:31 PM