Double Insulation - Makita UM401DW Manual De Instrucciones

ENGLISH
1 Raise
2 Handle
3 Square hole
4 Clamp nut
5 Protrusion
6 Interlock switch
7 Key
8 Inlet cover
9 Charging inlet
0 Indicator
q Charging plug
w Charging light
SPECIFICATIONS
Model
Effective cutting width .................................. 406 mm
No load speed (RPM) ...................................... 3,800
Dimensions (L x W x H) ..... 1,316 x 482 x 1,010 mm
Net weight ..................................................... 31.9 kg
Output ....................................................... D.C. 24 V
Charging time ...................................... Approx. 4 hrs
Batteries used in UM401DW
• Sealed Lead-acid Battery 12 V – 15 Ah x 2
• Number of cells – 12
• Due to the continuing program of research and
development, the specifications herein are subject
to change without prior notice.
• Note: Specifications may differ from country to
country.
Safety hints
For your own safety, please refer to enclosed safety
instructions.
These symbols mean:
Indoor use only
Read instruction manual.

DOUBLE INSULATION

IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERIES & CHARGER
1. SAVE THESE INSTRUCTIONS — This manual
contains important safety and operating
instructions for battery charger.
2. Before using battery charger, read all instruc-
tions and cautionary markings on (1) battery
charger and (2) product using battery.
3. CAUTION — To reduce risk of injury, charge
ONLY MAKITA type rechargeable batteries
used in Model UM401D. Other types of batter-
ies may burst causing personal injury and
damage.
4. Do not expose charger to rain or snow.
5. Use of an attachment not recommended or
sold by the battery charger manufacturer may
result in a risk of fire, electric shock, or injury
to persons.
4
Explanation of general view
e Charger
r Lever
t 32 mm wrench
y Loosen
u Hex bolt
i 13 mm socket wrench
o Blade holder
p Blade
a Cup spring
s Tighten
d File or sharpening stone
f Vice
6. To reduce risk of damage to electric plug and
UM401DW
7. Make sure cord is located so that it will not be
8. Do not operate charger with damaged cord or
9. Do not operate charger if it has received a
10. Do not disassemble charger or product which
11. To reduce risk of electric shock, unplug
ADDITIONAL SAFETY RULES
FOR BATTERIES IN MOWER
1. Use ONLY the Makita charger Model DC240
2. Do not short the battery:
3. Do not leave mower exposed to direct sun-
4. Batteries in Makita Model UM401D contains a
g Screwdriver
h Rear guard
j Rear bag
k Holes
l Protrusions
; Mulching plate
z Hook
x Undercover
c Depress switch button
v Pull switch lever
b Restart button
n Deck
cord, pull by plug rather than cord when dis-
connecting charger.
stepped on, tripped over, or otherwise sub-
jected to damage or stress.
plug — replace them immediately.
sharp blow, been dropped, or otherwise dam-
aged in any way; take it to a qualified service-
man.
contains battery; take it to a qualified service-
man when service or repair is required. Incor-
rect reassembly may result in a risk of electric
shock or fire.
charger from outlet before attempting any
maintenance or cleaning. Turning off controls
will not reduce this risk.
specified to charge the Makita Model UM401D.
(1) Do not touch the charging inlet with any
conductive material.
(2) Shut the cover on the charging inlet when
not charging.
(3) Do not expose mower to water or rain.
A battery short can cause a large current flow,
overheating, possible burns and even a break-
down.
light. Do not store mower in locations where
the temperature may reach or exceed 40°C
(104°F).
strong electrolyte (dilute sulfuric acid). Do not
apply undue force to the batteries, drop or
strike them. Do not attempt to disassemble or
make modifications to the batteries.