Publicidad
Idiomas disponibles
Idiomas disponibles
RAPID DEVELOPMENT AT 45 °C (ONE-SHOT DEVELOPMENT)
Step
0 Pre-heat the developer drum
1 Colour Developer
2 Bleach Fix
3 Rinse
4 Stabilizer
NOTES: Depending on the processor used, the rotation speed and the type of film, the time for the co-
lour developer is to be lengthened in the case of under-development (+ 10 s) and shortened in the case
of over-development (- 10 s).
PUSH-DEVELOPMENT AT 38 °C
Colour Developer time for each f-stop step is to be extended by 30 seconds at 38 °C.
G EN ERAL IN STR UCTIONS
PROCESSING
Stop bath (TETENAL Indicet 1+19 or 3% acetic acid: 20 s) increases processing reliability when the
bleach fix bath is re-used several times.
If the user processes predominantly high-speed films (ISO 400/27° and faster), it is recommended
that only three development runs (per litre of colour developer) be done.
If development is uneven (sheet films), it is recommended that the rotation speed be increased and/
or the film be pre-washed for two minutes at process temperature.
6
Temp. °C
45 °C
45 °C
45 °C
45 °C
20-40 °C
Processing time
2' 00''
2' 00''
3' 30''
4 x 15''
0' 30''
Publicidad
