Publicidad
EN
1- This torque wrench is a precision instrument intended to be used only to
tighten screws, bolts and nuts to a desired torque.
2- Make sure that you adjust the wrench to the exact torque units your
specifications call for, or you will severely under-torque or over-torque, causing
severe damage to the equipment you are working on.
3- Do not disassemble the wrench for any reason. Highly stressed internal
components may cause severe injury when released in an unintended manner.
4- The wrench should be re-calibrated periodically. The calibration of the
wrench should be checked at least once a year, after any abnormal handing or
overloading, or after 5000 cycles("clicks").
1.Ratchet head with
reverse level, quick
release
47
45-tooth reversible ratchet: wrench operates in both
clockwise and counterclockwise direction. However,
unless stated otherwise, the wrench is calibrated in
clockwise direction only.
Flexible head can swing up and down +/- 15° Angle.
Publicidad
