Publicidad
EN
1- Insert an appropriate socket or drive attachment onto the square drive of the
ratchet and onto the fastener you want to tighten.
the wrench at the ratchet head with the other hand to steady it, especially when
using long socket extensions, without appreciably affecting the accuracy of the
wrench.
3- If, due to the required effort, you need to use both hands, put the other hand
on the top of the first hand, never on any other part of the wrench.
4- Apply slow and steady pull or push until the wrench momentarily releases,
with or without a distinct "click" sound. Release the pressure right at this point.
DO NOT OVERTORQUE.
SAFETY WARNING
Overtorqued or defective fasteners, sockets, as well as the wrench itself, may
suddenly break causing you to lose balance, fall, or to suffer other trauma. Be
sure that you have firm footing, are properly balanced, and if necessary are
using appropriate harness, back support, or other safety device.
MAINTANANCE
1- When not in use, adjust the wrench to its lowest reading, and store it in the
provided case.
2- With the exception of the ratchet mechanism, do not lubricate the wrench.
The ratchet mechanism may be lubricated as needed with a few drops of light
machine oil.
3- Do not use acetone or other solvents to clean the wrench, use window
cleaner or denatured alcohol applied with a clean cloth instead.
4- With the exception of the ratchet mechanism, there are no user-serviceable
parts. Do not disassemble the torque wrench for any reason. When service is
needed, send the wrench to the nearest factory-authorized service center.
CERTIFICATION
This torque wrench is certified to have been calibrated prior to shipment to the
accuracy of +/- 4% in the clockwise direction.
50
Publicidad
