Iii.3.b Executive Directions - Galvamet KompaKOne Manual De Instrucciones

EN
III.3.b EXECUTIVE DIRECTIONS
The base must be at least cut as shown in Fig. 3.29 and the back removed if needed.
If installation includes the plasma filtering kit (available as optional) the cut of the base
can be reduced to 660mm of large.
Fig. 3.30
Installation of the appliance imply a
maximum length of the drawers that may
be mounted under the hob (Fig. 3.31)
 Upper drawers depth= 450mm
 Last drawer depth = 350mm
Fig. 3.31
25