Tools & Parts; Tools Needed; Parts Supplied; Specifications - Maytag Commercial MLG27PN Instrucciones De Instalación

Tools Needed:

203 mm (8")
or 254 mm (10")
Pipe wrench
TORX T20 Security
†
screwdriver or bit
Level
Caulk gun and caulk
(for installing new exhaust vent)
Flashlight (optional)

Parts Supplied:

Foot boots (4)
NOTE: The circuit diagram for this dryer is located inside the lower front panel, within the Tech Sheets.
These units are sold in multiple regions with different
requirements for measuring capacity. Below are a few
of the valid forms of measure posted on this product:
Dry Linen Capacity: A weight measure that reflects a minimum
threshold for dry volume capacity that is needed for import tariff
purposes.
IEC Capacity: The capacity measure that represents the
maximum capacity of dry linens and textiles which the
manufacturer declares can be treated in a specific cycle.
TORX and T20 are trademarks of Acument Intellectual Properties, LLC.
†
203 mm (8") or 254 mm (10")
Adjustable wrench
that opens to 25 mm (1")
25 mm (1") Hex-head
socket wrench
Utility knife
Vent clamps
13 mm (1/2") and 14 mm
(9/16") Open-end wrenches
Leveling legs (4)
Flat-blade screwdriver
8 mm (5/16") Socket wrench
6 mm (1/4") Nut driver
Pipe-joint compound
suitable for gas type
Ruler or measuring tape
Dry Linen Capacity
10.5 Kg (23 lb)
IEC Capacity
9 Kg (20 lb)
Sound Level
LpA: 58 dB(A) (Kpa+/-10 dB(A))
TOOLS & PARTS
Phillips screwdriver
Pliers
(that open to 39 mm [1
9
Locking pliers
686 mm (27") Wood block
Putty knife

SPECIFICATIONS

/ "])
16
7