arrow button 9 times moves to 09
for 09 o'clock am)
10. Press the time switch again to
confirm the hour setting and
move to the minute setting. The
minutes digits blink.
11. The current minutes can now be
entered by pressing the arrow
button. (Example: pressing the
left arrow button 10 times moves
to 50 for 09:50 o'clock am).
12. Press the time switch again to
confirm all settings. Date and
time are now stored, the clock
starts running and the monitor
switches to
which enable your first
measurement.
13. Close the data compartment.
•
Please note: If you hold down the
arrow key for more than 2
seconds it speeds up.
•
Date /time can also be set easily
from computer when you
Microlife Analyzer Software.
«ready» condition
run the
10