Gima 28010 Guía De Uso página 7

7
ENGLISH
1. INFORMATION
This manual shall only be used for the reference of operation of this particular model. If the manual is used for other purposes,
GIMA will not undertake any according consequences and responsibility. All information of this manual shall be protected by
copyright and shall not be copied, copied and translated in any part of this specification without the written consent of our
company.
2. WARNING
Power supply must be cut off when changing electrical components or maintaining and cleaning machines.
The plug must be plugged into an outlet that is properly installed and grounded, to prevent the risk of fire and electric shock.
Do not stand on this equipment.
Do not allow children to play with and place the equipment in a place where children can avoid touching; Please adjust the
backrest back to the highest position when you leave.
Please do not place the equipment in damp places such as bathroom to avoid electric shock or other failure; The remote control
should also avoid contact with water.
Please do not place the equipment in places where painting/coating or oxygen providing during operation.
Unless being monitored or instructed by personnel who can be responsible for their personal safety, the people who have phy-
sical obstacles, tactile disorders, mental disorders, lacking of experience, common sense or children, are not allow to use the
equipment.
Please contact distributor, service center or related personal with appropriate skill and experience for repairing if the plug is
damaged, in case of any dangerous.
Please make sure there is no accessible thing within the stroke during any operation of the beds. Maintenance should be pro-
cessed by trained professionals.
3. PRECAUTIONS
Read this manual carefully before installation, operation and adjustment. And please keep it well. This Electribed is equipped
with a three-wire power cord. The power cord must be plugged into an three-hole outlet which is properly installed and groun-
ded. This is not only to prevent the risk of electric shock, but also ensure bed work properly.
When adjusting the backrest, seat cushion, footrest or lifting of the whole bed by manual controller or foot control switch, please
keep your hands, feet and head away from the position1.2.3.4.5.6.7 showed on below photo to avoid getting jammed.
While controlling the lifting of the whole bed, the button must be pressed continuously until the bed be in a suitable position.
Maintenance should be processed by trained professionals.
After each treatment, please use neutral detergent to clear the dust, stains on leather or on plastic cover.