Pairing Your Cla7Bt To Additional Devices; Wearing The Unit; Important - ClearSounds CS-CLA7BT Manual De Instrucciones

PAIRING YOUR CLA7BT TO
AddITIONAL dEVICES.
Your CLA7BT can store pairing information for
up to eight (8) different devices with Bluetooth
wireless capability. Devices are stored in a
"Paired Device List" in the memory in a time
sequence. When an attempt to pair more than
eight devices is made, the oldest paired device
is removed from the memory list. Any of the
eight paired devices can initiate a connection
to the CLA7BT.
The neckloop will automatically initiate a
connection (once turned on) with the last
device to which it was connected. If you want
to connect the CLA7BT to another device in
the paired device list, you must initiate the
connection from that device. When any of the
eight devices initiates a connection to your
neckloop, that device then becomes the "last
connected" device.

WEARING THE UNIT

1. Place the wire around your neck and insert
the round connector plug into the Neckloop
Quick Disconnect plug, forming a loop.
IMPORTANT: To have the Neckloop operate
properly, you will need to be sure the
Quick Disconnect connection jack has been
10 – ENGLISH