Briteq BT-W07L 12 Wash Manual De Instrucciones página 7

ENGLISH
MAIN MENU:
 To select any of the pre-set functions, press the MENU
button up to when the required one is shown on the
display.
 Select the function with the ENTER button. The display
will blink.
 Use DOWN and UP button to change the mode.
 Once the required mode has been selected, press the
ENTER button to select. After 8 seconds the display
will automatically return to the main functions without
any change.
To go back to the functions without any change press the
MENU button. The main functions are shown on the right.
DMX Address
Used to set the starting address in a DMX setup.
 Press the MENU button until "DMX address" is shown
on the display.
 Press the ENTER button, the display starts blinking.
 Use DOWN and UP buttons to change the DMX512
address.
 Once the correct address shows on the display, press
the ENTER button to save it.
(or automatically return to the main functions without
any change after 8 seconds)
To go back to the functions without any change press the
MENU button again.
Channel Mode
 Press the MENU button until "Channel mode" is
shown on the display.
 Press the ENTER button so the display starts blinking.
 Use DOWN and UP button to select the one of the
available dmx modes.
 Once the mode is selected, press the ENTER button to
setup
(Or automatically return to the main functions without
any change after 8 seconds.)
To go back to the functions without any change press the
MENU button again.
Show Mode
Used to choose the Show mode when used in
standalone or master/slave mode.
 Press the MENU button until "Show mode" is shown on
the display.
 Press the ENTER button, the display starts blinking.
 Use DOWN and UP buttons to select "Show 1", "Show
2", "show 3" or "show 4" mode.
 Once the right mode shows on the display, press the
ENTER button to save it.
(or automatically return to the main functions without
any change after 8 seconds)
To go back to the functions without any change press the
MENU button again.
Show 1 mode- Fixture is placed on the floor. Tilt
movement angle 210°.
BRITEQ
®
5/86
OPERATION MANUAL
BT-W07L12