Lmo Equipment - Lamborghini Caloreclima ECO 14/2 Manual Para La Instalación Y El Mantenimiento

LEGEND
CH Counter (possible)
F Fuse
FA Interference filter
FR Photoresistor
IG Main switch
LR Lock-out lamp (possible)
MB Burner motor
MMS Air servocontrol terminal
MPE Control box (Landis)
NOTE - Do not invert PHASE-NEUTRAL wires.
NOTE - When operating with TMF, it is necessary to take bridge on the 3-pole connector.

LMO EQUIPMENT

The release pushbutton on the equipment is the main component for accessing all the diagnostic functions
(activation and deactivation) as well as for releasing the control and checking device.
The release pushbutton has a multicoloured led which indicates the state of the control and checking device
during operation and when the diagnostic function is in use.
Condition
Standby, other intermediate states
Fuel preheating "on", waiting time 5s.max
Ignition stage
Correct operation
Incorrect operation, current level of
flame detector below permitted minimum
Drop in voltage
Burner lock out
Fault (see table on page 8)
Stray light before burner ignition
Rapid flashing for diagnostics
MR Auxiliary terminals
MV Suspended terminal
TC Boiler thermostat
TR Ignition transformer
TS Safety thermostat
TMF 2nd st.modul.thermostat
VE1 1st st.solenoid valve strip
VE2 2nd st.solenoid valve terminal strip
EQUIPMENT STATE INDICATORS
Description
Colour sequence
No light
Yellow
Yellow, flashing
Green
Green, flashing
Alternating yellow red
Red
Red, flashing
Alternating green red
Red, rapid flashing
21