Wash Cycles And Options; Table Of Programmes And Wash Cycles; Wash Option - Hotpoint Ariston FMF 923 Manual De Instalación

Wash cycles and options

Table of programmes and wash cycles

Description of the wash cycle
CLEAN Plus
1 Anti Stain
2
Anti Stain Quick
3 Whites
4
Cotton Standard 60°C
5
Cotton Standard 40°C
6 Synthetics: heavily soiled resistant colours.
6 Synthetics (4): lightly soiled resistant colours.
SPECIALS
7 Anti allergy Plus
8 Anti allergy Delicate
9 Wool: for wool, cashmere, etc.
10 Delicates
ECO
11 Cotton Standard 20°C: lightly soiled resistant and delicate colours.
12
Eco Cottons
13 Eco Synthetics
14 Eco Fast 30'
Partial Programmes
Rinse
Spin and Pump out
Pump out only *
* If you select programme and exclude the spin cycle, the machine will drain only.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 4 with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at
60°C . The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle 5 with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at
40°C . The actual washing temperature may differ from the indicated value.
3) At 60 °C the "Prewash" function cannot be selected.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle 5 with a temperature of 40°C.
4) Long wash cycle for synthetics: set wash cycle 6 with a temperature of 40°C.
Wash options
! If the selected option is not compatible with the set
wash cycle, the indicator light will flash and the option
will not be activated.
Prewash
If this function is selected, the pre-wash cycle will run; this
is useful for removing stubborn stains.
N.B.: Put the detergent in the relevant compartment.
(1): heavily soiled whites and resistant colours.
(2): lightly soiled resistant and delicate colours.
Detergents
Max.
Max.
speed
temp. (°C)
(rpm)
40° 1200   -
40° 1200 - -

60° 1200 -
 
60°
1200 (3)  
(Max. 90°C)
40° 1200 -  
60° 800
  
40° 800
  
60° 1200 -
 
40° 1200 -  
40° 800 - -

30° 0 - -

20° 1200 -
 
Cold
1200 - -

Water
Cold
800 - -

Water
Cold
800 - -

Water
- 1200 - - -
- 1200 - - -
- OFF - - -
 5 - - - 180'
4,5 - - - 60'

5 - - - 180'

9 53 1,19 57,5 195'

 9 53 1,09 92 175'
4,5 46 1,03 60 115'

4,5 46 0,56 60 100'

5 - - - 195'

 5 - - - 200'
2 - - - 85'

1 - - - 80'

9 - - - 175'

9 53 0,23 68 80'

3 48 0,12 37 70'

3 71 0,10 36 30'

9 - - - 36'

- 9 - - - 10'
- 9 - - - 3'
9
GB