Pc Connection - JVC LT-19HA22U Manual De Instrucciones

PC connection

Follow these steps: On your PC monitor choose a resolution of 1360 × 768 at 60Hz and save this
configuration. Shut down your PC and connect the shut off LCD TV.
Use a screensaver to avoid burning-in of static picture content.
Select PC input
Switch on the LCD-TV.
Select the PC input mode (see page 12).
Note:
• If no signal or a signal with a non-
supported resolution is connected,
No Signal is displayed
• As this LCD-TV is not a PC monitor
correct display cannot be guaranteed
for every PC / graphics card.
• If by any chance the PC should
create a picture on the HDMI-input
then there can be no guarantees for
its correct representation.
Supported PC resolutions
resolution
640x480
800x600
1024x768
1280x720
1280x768
1360x768
1280x1024
1440x900
1920x1080
Selected Items
22
fps (Hz)
60
60
60
60
60
60
60
60
60
PC
Auto Adjust
Hor Position
Ver Position
Phase
Clock
Use a PC-VGA cable (not supplied) to connect the LCD-Monitor
to your PC. Make the connections carefully so as not to break or
bend the contacts inside the plug.
LT-19.../LT-22....
TV (Rear view)
to PC/DVI AUDIO input
LT-26.../LT-32....
TV (Rear view)
to PC/DVI AUDIO input
Example: Adjust the contrast.
1
During PC mode press MENU.
2
Select /Contrast, then press ENTER. Press
adjust Contrast.
3
Press RETURN several times to return to the normal
screen.
Hor Position, Ver Position, Phase and Clock are
adjusted automatically as per the input PC video signal.
• When PC-input mode was selected and a PC-signal
was input, Auto Adjust will be performed automatically.
To adjust the horizontal placing of the image.
To adjust the vertical placing of the image.
Eliminates the horizontal (PHASE) interfering lines.
Eliminates the vertical (CLOCK) interfering lines.
VGA Cable (not supplied)
Audio cable (not supplied)
Audio cable (not supplied)
VGA Cable (not supplied)
Setup hint
PC
PC
or to