Operating Elements And Connections; Front Panel; Rear Panel - Monacor IMG STAGE LINE CD-112 Manual Del Usuario

All operating elements and connections de -
scribed can be found on the fold-out page 3.
1 Operating Elements and
Connections

1.1 Front panel

1 POWER switch
2 Control section of the CD player
(for details see fig. 2)
3 Control section of the tuner
(for details see fig. 3)
1.2 CD player
4 USB interface to connect a USB flash drive or
a hard disk
5 CD slot
Insert the CD into the slot until it is pulled in
automatically.
6 Button PROG to switch to the programming
mode to compile an individual title sequence
( chapter 5.2.7)
☞
7 Buttons REV – SKIP – CUE for title selection
and for fast forward / reverse
Title selection
Each time you press the button CUE, the
player will go to the next title; when you
press the button REV, the player will return
to the beginning of the current title and
each time you press it again, it will go back
one title at a time.
Fast forward / reverse
For fast forward, keep the button CUE
pressed; for fast reverse, keep the button
REV pressed.
8 Button STOP to stop the replay
9 Button PLAY/ PAUSE to switch between
replay and pause
10 LED CD: will light up when it is possible to
control the CD player with the remote control;
also see item 42, button CD / TUNER
11 Button EJECT to eject the CD
12 Display of the CD player
13 Button REPEAT to select the repeat func-
tions and random replay
basic setting (PLAY ALL)
all titles of the sound carrier or of a pro-
grammed title sequence will be replayed
once
first actuation of button (PLAY ALL RANDOM)
the titles will be replayed once in random
order
next actuation of button (REPEAT TRACK)
the title selected will be repeated continu-
ously
next actuation of button (REPEAT FOLDER)
all titles in the folder selected will be re -
peated continuously
(function available for MP3 files only)
next actuation of button (REPEAT ALL)
all titles will be repeated continuously
next actuation of button (RANDOM REPEAT)
all titles will be replayed continuously in
random order
next actuation of button (PLAY ALL)
return to basic setting
14 Buttons FOLDER for folder selection of MP3
files:
To select the next folder, press the button
To return to the previous folder, press the
button . The player always goes to the
first title of the folder selected.
15 Button FIND to search for MP3 titles and fold-
ers ( chapters 5.2.2 C and D)
☞
16 Button MUTE to mute the CD player
17 Button FUNC to select the sound carrier (CD,
USB flash drive, SD/ MMC memory card)
18 Slot to insert an SD/ MMC memory card
1.3 Tuner
19 Buttons TUNING (DOWN / UP)* for station
tuning: Briefly press the button to increase or
decrease the received frequency; if you press
one of the buttons for more than 0.5 seconds,
the station scanning will start (upwards or
downwards).
20 Buttons STATION (M-DOWN / M-UP)* for step-
wise selection of stored stations (upwards or
downwards)
21 Button BAND to switch between FM recep-
tion (indication "FM") and AM reception (indi-
cation "AM")
22 IR sensor for the remote control signals
23 Button SLEEP for the automatic switch-off
function of the tuner after a preset time
(90 – 10 minutes); each time you press the
button, the time will decrease by 10 minutes
To switch the tuner on again, press the button
SLEEP ( chapter 5.3.3).
☞
24 LED TUNER: will light up when it is possible
to control the tuner with the remote control;
also see item 42, button CD / TUNER
25 Button ASM for automatic search for stations
and storage of stations
To activate the function, briefly keep the but-
ton pressed.
26 Display of the tuner
27 Station buttons 1 – 5 to select the stations
stored on these buttons
28 Button +5 to select stations of the storage
locations 6 – 60: After pressing a station but-
ton (27), press the button +5 as often as nec-
essary.
29 Button STORE (MEM)* to store stations:
After station tuning with the buttons TUNING
(19), press the button STORE, then select
the storage location with the buttons STA-
TION (20) or the station buttons 1 – 5 (27)
and +5 (28). Finally press the button STORE
once again.
* lettering on remote control

1.4 Rear panel

30 RS-232 interface for remote control of the
unit via a computer
31 Terminal AM LOOP for an AM antenna
An AM antenna with support is supplied with
the unit.
32 Terminal FM for an FM antenna
A basic FM wire antenna is supplied with the
unit; connect it to the red terminal.
33 XLR jack TUNER OUT for the audio output of
the tuner
34 XLR jack CD PLAYER OUT for the audio out-
put of the CD player
.
35 Mains jack for connection to a socket (230 V~ /
50 Hz) via the mains cable provided
36 Support for the mains fuse
Always replace a blown fuse by one of the
same type.
1.5 Remote control
The buttons of the remote control up to and
including item 29 are also available on the unit
and are described in chapters 1.2 and 1.3. The
buttons with two item numbers have different
functions for control of the CD player (number on
the left) and of the tuner (number on the right).
Press the button CD / TUNER (42) to switch the
remote control between control of the CD player
[LED CD (10) will light up] and control of the
tuner (LED TUNER (24) will light up]. The follow-
ing buttons are available on the remote control
only:
37 Numerical keys 1 – 100
– CD player: for direct selection of a title,
examples:
Title number Keys
4 4, PLAY/ PAUSE
10 1, 10/0, PLAY/ PAUSE
135 1, 3, 5, PLAY/ PAUSE
– tuner: to select the stored stations 1 – 10;
to select the stations 11 – 60, press the but-
ton +10 (41) as often as necessary
38 Button DIRECT for the tuner for direct selec-
tion of a received frequency:
1. Press the button DIRECT.
2. Enter the frequency with the numerical
keys (37).
3. Press the button DIRECT.
39 Button DISPLAY for the CD player to change
the information in the lower line of the display
during replay of MP3 files
For MP3 files, the name of the title, the name
of the artist and the name of the album will
scroll in the upper line of the display.
basic setting
The lower line will show the title number
(TR) and the time already played of the
title.
first actuation of button
The folder name will be displayed.
second actuation of button
The file name will be displayed.
third actuation of button
The number of folders and the number of
titles will be displayed.
fourth actuation of button
return to basic setting
40 Button ESP MO/ST
– CD player: to deactivate and reactivate the
anti-shock memory (not in MP3 mode)
– tuner: to switch between stereo reception
and mono reception
41 Button +10 for the tuner to select the stored
stations 11 – 60. After pressing a numerical
key (37), press the button +10 as often as
necessary.
42 Button CD/ TUNER to switch the remote con-
trol to control of the CD player [LED CD (10)
will light up] or to control of the tuner [LED
TUNER (24) will light up]
GB
9