VERTBAUDET TB1510M Instrucciones De Uso página 18

part and steam to avoid get burned.
/The steam cooking time depends on the type of food. Please refer to the steaming
time table included in the manual as guidance. You should adjust the steam cooking
time as required by filling different amount of water to the tank.
(2) When steam cooking is finished, the indicator light would be off, Turn back the
knob to the position "0".
(3) Wait a short while and open the jar lid when the jar no longer exhausts steam and
the steaming basket become cool, take the basket out with the aid of the supplied
food spatula (Figure 12) or with heat-insulating kitchen gloves.
(4) Please follow the "blending function" instructions if you want to process the
cooked food into puree.
(5) Attention: Before steam cooking the frozen food, you need to defrost them first.
Blending/Chopping Function
1) Put the cooked or flesh food into the blending jar.(Figure 13)
2) Add ingredients as required and cover the jar lid by anticlockwise. All foods and
ingredients inside the blending jar should not exceed the max 900ml. (Figure 14).
3) When using blending function, need to put the food into blending jar, place splash
cover over blending jar, and then do the next step of blending function (Figure 15).
Figure 12 Figure 13
Notes:
A. Do not operate the blending function when
the blender jar is empty.
B. Be sure the jar lid and the jar are in the
correct position. The hook of the lid must be
fully inserted into the slot on main body. (The
inlet hole on the blender jar lid must line-up
exactly with the steam outlet on the machine).
(4) Blending:
Turn the knob to blending/chopping
machine start blending function, and just release the button once the foods become
mushy, the knob will turn back to "0" position.
(5) Scrape the foods out from blending jar by spatula. (Figure 16 – Figure 17)
(6) Unplug the appliance and clean the blending jar.
(7) Clean the blending jar.
Figure 14
Notes:
When blending some pigmented foods such
as chili and carrot, the jar might be dyed and
this does not affect the continuous usage of
the machine.
Figure 15 Figure 16
position for maximum 5 seconds, the
Figure 17