Briteq POWERPIXEL4-RGB Manual De Instrucciones página 7

ENGLISH
SLAVE MODE
Used to set the projector in slave mode: the projector copies the output of the master in the line.
 Press the MODE button until "SLAVE MODE" is shown on the display.
 Connect the projector to a master.
Note: POWERPIXEL4-RGB and POWERPIXEL8-RGB can be mixed in one line, master should be a
POWERPIXEL8-RGB!
SOUND MODE
Used to set the projector to standalone sound mode with different chases playing in endless loops.
Press the MODE button until "SOUND MODE" is shown on the display.
 Press the ENTER button: the sensitivity of the microphone (SENS) can be set from 00 to 31.
 Use DOWN and UP buttons to change the value.
 Press the ENTER button: the repetition rate (FQN) of the chases can be set from 00 to 99.
 Use DOWN and UP buttons to change the value.
SIMPLE AUTO MODE
Used to set the projector to standalone auto mode with different chases playing in endless loops.
Press the MODE button until "AUTO RUN" is shown on the display.
 Press the ENTER button: the repetition rate (FQN) of the chases can be set from 00 to 99.
 Use DOWN and UP buttons to change the value.
STANDALONE MODE
Used to set the projector to standalone auto mode with user adjustable options or chases.
 Press the MODE button until a number ranging from "01." to "14." is shown on line1 of the display.
 Press the ENTER button: use the UP/DOWN buttons to select one of the 14 available options/chases.
 Depending on the option/chase selected you have different settings:
 01.STATIC: (7static colors can be selected.)
 Press the ENTER button: one of the 7 static colors (CL) can be selected.
 Use DOWN and UP buttons to change the color.
 Press the ENTER button: strobe rate (Flash) can be set from 00 (no strobe) to 99 (fast).
 Use DOWN and UP buttons to change the value.
 01. to 12.XXXXX: (different chases, including color fade, color change, meteor effect, ...)
 Press the ENTER button: Speed can be set from 01 to 99.
 Use DOWN and UP buttons to change the value.
 Press the ENTER button: strobe rate (Flash) can be set from 00 (no strobe) to 99 (fast).
 Use DOWN and UP buttons to change the value.
 13.FLOW8 and 14.FLOW9: (chases in 1 or 2 directions with choice of chase colors)
 Press the ENTER button: Speed can be set from 01 to 99.
 Use DOWN and UP buttons to change the value.
 Press the ENTER button: strobe rate (Flash) can be set from 00 (no strobe) to 99 (fast).
 Use DOWN and UP buttons to change the value.
 Press the ENTER button: Basic color of the chase (C1) can be selected.
 Use DOWN and UP buttons to change the color. (or blackout)
 Press the ENTER button: Running color of the chase (C2) can be selected.
 Use DOWN and UP buttons to change the color. (or blackout)
FLOW INVERT MODE
Used to change the running direction of the chases.
 Press the MODE button until "FLOW INVERT" is shown on the display.
 Use DOWN and UP buttons to toggle between ON and OFF.
BLACKOUT MODE
Used to select the behavior of the projector when DMX fails (no DMX detected).
 Press the MODE button until "BLACKOUT MODE" is shown on the display.
 Use DOWN and UP buttons to toggle between:
 BLACKOUT: output turns black while no DMX is detected.
 FREEZE: output based on the last valid DMX-signal is kept on the projector.
Note: as soon as the input detects a DMX-signal, blackout or freeze mode will be cancelled.
BRITEQ
®
5/64
OPERATION MANUAL
POWERPIXEL4+8-RGB