Introduction; Intended Use Of The Smartdrive; Must Read Prior-To-Use Information; Warnings And Safety Precautions - max mobility SmartDrive MX2+ Manual Del Usuario

1

1. Introduction

Intended Use of the SmartDrive

The Permobil / Max Mobility SmartDrive Wheelchair Power Assist device is exclusively intended to provide auxiliary power
to manual wheelchairs to reduce the pushing power needed by their users, including pediatrics, with a user weight of 30
to 331 lbs (14 - 150 kgs). It is intended to be used by users capable of operating and maneuvering a powered and manual
wheelchair, ultimately empowering them through enhanced mobility. It is also very strongly recommended that it be used on
manual wheelchairs that meet the "Wheelchair Compatibility" dimensions listed in the Specification Sheet.

Must Read Prior-to-Use Information

Improper use of the SmartDrive or the wheelchair it is attached, depending on surface, weather, and traffic conditions, can
present a potential of injury and cause damage to the wheelchair or SmartDrive. Therefore, the SmartDrive must only be
handled and used under the following prerequisites:
• The user is both physically and mentally capable of operating the wheelchair and device in all possible conditions
and situations. [Contraindication]
• Proper instruction on its handling and operation has been received by reading and understanding this user's manual
in its entirety.
• No technical modifications have been made to the device.
• The user must take time to become accustomed to the SmartDrive's response and performance by first practicing
its operation in a safe area that is free from hazards. One should become familiar with the tap sensitivity, push
recognition, deactivation response, acceleration / top speed, etc. of the device before venturing out with the device,
where potentially hazardous situations may exist. It is strongly recommended that the user not attempt to use the
SmartDrive outdoors until it can be safely operated indoors without difficulty.
If any issues or malfunctions exist, cease the use of the SmartDrive and contact Permobil [SmartDrive] / Max Mobility for service / further
instruction. Any contrary use to the directions of this user' s manual, to the recommendations of one' s mobility equipment dealer, or to the
technical limitations defined by either Permobil [SmartDrive] / Max Mobility and one' s wheelchair manufacturer is considered to be mis-
use of the SmartDrive. Permobil [SmartDrive] / Max Mobility is not responsible for any injuries or damage caused by this type of misuse.

Warnings and Safety Precautions

All warnings and safety precautions issued by one' s wheelchair manufacturer must be heeded in addition to those stated in
this and any other provided manuals / instructions / guides, to include that provided within the SmartDrive MX2+ app.
Failure to do so could result in serious injury or death.
Handling or use of the SmartDrive MX2+ app or the
SmartDrive by anyone who has not received proper
instruction from this manual, the SmartDrive User' s
Manual and any other provided manuals / instructions / guides
may result in serious injury or death.
Do not attempt to attach the SmartDrive to a wheelchair
that does not meet the dimensions outlined in "Wheel-
chair Compatibility" section of the Specification Sheet.
One MUST familiarize themselves with the response and
performance of the SmartDrive prior to regular use. Do
not attempt to use outdoors until it can be safely operated
indoors without colliding into walls or any other objects.
Methods for safe use of a SmartDrive attached wheelchair
are different for each user depending on function and ability.
The specifications provided by one's wheelchair manufacturer
may be slightly affected by the addition of the SmartDrive.
The addition of the SmartDrive to one's wheelchair may
cause it to feel different. Take the time to become accus-
tomed to this new feeling.
Always inspect your SmartDrive, PushTracker / E2, at-
tachment hardware and SwitchControl button(s) for
missing parts / damage prior to each use [see "Main-
tenance" section(s) for parts to pay attention to].
Make sure the SmartDrive and PushTracker / E2 [if
used] are charged before use.
Always pay close attention to the surface that you are op-
erating your wheelchair, whether your SmartDrive is on or
not, as the front casters of your wheelchair can get stuck in
cracks, ruts, holes, ledges, etc. Running into these obsta-
cles can cause you to tip out of your chair.
Do not operate over significantly rough terrain, very slick
surfaces, extreme slopes, or loose ground. This may cause a
loss of traction, leading to injury or damage to your Smart-
Drive and void the warranty.
The SmartDrive is not designed to drive up or down large
curbs / steps. Only perform this maneuver when absolutely
necessary and always ask for help. Also be sure to turn OFF
the power assist [via SwitchControl and PushTracker / E2]
before maneuvering.
Use extreme caution when operating a SmartDrive attached wheel-
chair when near streets. Consider turning OFF the power assist [via
SwitchControl and PushTracker / E2] to reduce risk.
When crossing major roads, intersection, railway
crossings or highways as well as when you drive
(Continued on next page)