sAfety AnD environment
Safety
DMM14 MANUAL
3
Safety and environment
3.1
Safety
Caution: Risk of damage
•
Protect the equipment against
-
direct sunlight
-
the impact of significant dust and humidity
-
rain
-
vibrations or knocks.
•
Do not spill any liquids on the equipment and do not allow any other
objects to drop through the ventilation slits into the equipment.
•
Do not place any containers filled with liquid on the equipment.
•
The equipment must only be used in dry rooms.
•
The equipment must only be opened, serviced and repaired by
authorized personnel. The equipment contains no user-serviceable
parts.
•
Before connecting the equipment to power, check that the AC
mains voltage stated on the integrated power adapter is identical to
the AC mains voltage available where the equipment will be used.
•
Only operate the equipment on a mains voltage between the 100
and 240 V AC. Using adapters with different output voltage or cur-
rent types may cause serious damage to the equipment.
•
If any solid or liquid should get into the equipment, shut down the
system immediately. Disconnect the power cable from the power
outlet at once and have the equipment checked by our customer
service department.
•
If the equipment is not going to be used for a longer time, discon-
nect the mains cable from the power outlet. Please note that if you
switch the equipment off while leaving the mains cable plugged in,
it is not fully isolated from the power network.
•
Do not place the equipment near heat sources such as radiators,
heating ducts, amplifiers, etc.
72