Description
SYSTEM
CONTROL
Rotary knobs for
outputs
Modulation
display
Headphone
output
DMM14 MANUAL
The input sensitivity is modified using the gain regulator on the rear of the
connected equipment.
5.3.2
Operating mode / SYSTEM CONTROL
The DMM14 U (UL, ULD) has numerous functions such as volume, tre-
bles, bass, auto-mixer functions etc. These functions are selected on the
SYSTEM CONTROL (13).
5.3.3
Control for stereo outputs
The controls for the stereo output channels are labeled OUT 1 (14) and
OUT 2 (16). This control is used to change the following parameters on the
output channel:
•
Volume
•
Treble range
•
Bass range
•
Limitation response
•
Balance and delay
5.3.4
Modulation display for stereo outputs
The modulation display (15, 17) under the control for the stereo output chan-
nels shows the output level in dB.
5.3.5
Stereo headphone output
Both inputs and outputs can be picked up on the stereo headphone out-
put (18).
78