Tabla de contenido
Publicidad
• MG $ / € :
Magnetic Counterfeit Detection function.
This function allows the unit to analyze the magnetic characteristics of each bill
during the counting. The unit will stop counting if a bill is considered suspicious.
The MG function could be set up in three different levels:
a. USD-MG: for counting U.S. banknotes.
b. EUR-MG: for counting Europe banknotes.
MG-1
to MG-9: for other foreign currencies that use MG ink. Pressing the
c.
MG key for 3 sec. and using the +/- buttons, the user customizes the specific
MG sensitivity required for any specific currency.
Press
RESTART
• UV :
Ultraviolet Counterfeit Detection function.
This function allow the unit to analyze the ultraviolet characteristics of each bill
during the counting. The unit will stop counting if a bill is considered suspicious.
The UV sensitivity also could be customized by pressing the UV key for 3 sec.
and using the + / - buttons to reach the desired sensitivity setting.
Press RESTART to validate the selection.
• SPEED:
Counting speed selection
The AB5500 Series has 3 variable counting speeds
Slow: 900 bills/min.
• RESTART
Used for resuming the counting in MNL mode as well as for clearing the
current results before starting a new sequence of counting.
Also used for clearing the Error Messages.
• BATCH:
Preset batch selection
By pressing the BATCH button sequentially, the preset batch value will change
among 10, 20, 25, 50, 100 or Off.
In case the user needs a different quantity, use the + / - keys for
customizing the preset values.
• + / - : Scroll Up / Scroll Down buttons
These keys are used to scroll up / down the detailing information shown on the
display when the REPORT function is used.
These keys are also used for customizing the batch quantity.
to validate the selection.
Normal: 1200 bills/min.
Fast: 1600 bills/min.
11
Publicidad
Tabla de contenido
