Bartscher 162913 Manual De Uso Y Mantenimento página 40


Never place the device on the flammable surfaces.

You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.

Never place the device at the edge of a table to avoid accidents.

Never place the device in humid or wet environment.

When locating the device make sure there is a 10 cm gap from any walls or other
objects.

Do not block or cover ventilation slots of the device.

Place the device so that the plug is easily accessible for quick disconnection of the
device from power supply, if necessary.

Before the first use, remove the protective foil from the device. Remove the foil slowly
not to leave glue residues. Remove possible glue residues with appropriate solvent.
CAUTION!
Never remove the type plate and warning signs from the device.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate).
Connect the device only in case of compliance!

The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.

Two separate single sockets are necessary for connecting the double deep fat fryer
162914.
- 36 -