Times Schedules - Airzone RADIANT365 Manual De Instrucciones

Information. This parameter provides information on:
• Zone: firmware, zone, association, actuator or status of the communications.
•
System: firmware, settings and information about the system controllers.
• Devices: It displays the elements connected to the system.
•
Webserver: How to configuration and how to associate it, IP address and MAC address.
• Errors: Warnings on system incidents.

Times schedules

If you press the time schedule icon, you will access the menu where you can schedule up to 24 per zone:
To create a new schedule, press "Add new" and follow the next steps.
1. Select the type of time schedule to apply and press confirm.
•
Mode. Allows to choose the operating mode (only available for Blueface Master thermostat).
• Temperature. Allows to select the set-point temperature.
2. Select the days of the week, time and action to perform.
3. Press confirm.
To activate/deactivate or modify a schedule, press the desired schedule to access the edit setting and then press the On/Off
selector or parameters to modify. Press and hold on any schedule to see all the available settings:
Edit: Changes the name of a schedule.
To edit the name of a schedule, press and hold the name of the zone to access the name editor. Then, change the name.
Keep in mind: If a wireless zone is renamed, the name will be displayed in the wireless controller after 5 minutes of inactivity
or after the first touch, whichever occurs first.
Delete: Deletes an existing schedule.
Copy: Copies a schedule to apply it in any other zone.
When activating a schedule, the schedule icon is displayed
visible and the icon will be crossed out
. If the schedules are deactivated, the list of schedules will remain
.
Add. Create schedule
Activate/Deactivate time schedules
Mode schedule
Temperature schedule
ES
EN
FR
IT
PT
DE
25