Home Screen - Airzone RADIANT365 Manual De Instrucciones

HOME SCREEN

Press on the Airzone icon once to deactivate the screensaver and go to home. Once there, you will find the following functions:
Operating mode
Zone
Settings menu
Sleep Mode
Home screen/ Confirm
Navigate through the Think Controller by pressing the side buttons on the control bars.
Operating modes. It displays the operating mode selected from the Master controller (or from the Think thermostat if
configured as Master). These are 5 available modes: cooling, heating and stop (
Eco-Adapt saving function: It defines the level of energy efficiency set by the Blueface.
Zone/Room temperature: It displays the zone where the thermostat is located. Its name is defined from the Master Blueface
thermostat. It displays the room temperature of the zone.
Settings menu: The Sleep mode parameters can be always configured. If you have a Master Think, you can change the mode.
Set-point temperature: It displays the temperature set from the Think control bar (
Relative humidity: Indicator of the humidity of the environment.
Sleep Mode: Indicator of the state of the Sleep mode (set from settings menu or from the Blueface).
Time schedules: It displays the state (on/off) of the time schedules of the zone. It is set from the Blueface.
Control bar: It adjusts (by pressing or by sliding) all the parameters controlled by the Think.
Airzone: A button used to confirm and return to home.
On/Off: On/off of the zone where the thermostat is located.
Eco-Adapt function
Control bar
Set-point temperature
Relative humidity
Time schedule
On/Off
See section settings menu).
See section temperature settings).
ES
EN
FR
IT
PT
DE
29