Canon imagePROGRAF TA-30 Guía De Configuración página 5

Caution
●
When setting the printer down temporarily, make sure to put the printer
on a flat, stable surface.
4
Place the printer on the stand such that their positions are
aligned as shown in the diagram.
Important
●
If you are not using a stand, place the printer in the installation
location and proceed to " Turning On the Printer".
3
●
Supporting only the center of the printer when carrying or setting the
printer down may damage the printer.
5
Affix the printer to the stand using the included screws.
● Affix using screws at 2 locations each on the left and right
sides of the stand as shown in the diagram.
4