Unpacking And Content; Assembly & Adjustment - POWER SMITH PWLR108S Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

UNPACKING AND CONTENT

IMPORTANT
faulty or that a part is missing. If you find anything wrong, do not operate the product until the
parts have been replaced or the fault has been rectified. Failure to do so could result in serious
personal injury.
CONTENTS IN PACKAGE
Description
Work light
Stand
USB Charging Cable
ASSEMBLY & ADJUSTMENT
ATTACHING THE WORK LIGHT HEAD TO THE STAND (FIG 1)
To Install the Work Light Head on the Stand
1. Place the stand (6) on a flat surface.
2. Position the bracket (5) of the work light head against the stand as shown in FIG 1.
3. Use the locking knob (8), flat washer and spring washer to secure the work light head on the stand.
CHARGING THE WORK LIGHT (FIG 1)
This rechargeable work light is shipped with the battery partially charged. Charge the work light after purchase and
before first use by connecting the included USB charging cable to a USB power output, a cellular phone power adaptor
or a laptop USB port for example.
1.
Make sure the work light is off.
2.
Lift the clear cover (13) to expose the charging port (11).
3.
Connect the micro end of the USB charging cable to the charging port.
4.
Connect the USB end of the charging cable to a USB power output (not included).
5.
The charging indicator will be illuminating Flashing Green, indicating charging is in progress.
6.
The charging indicator turns Solid Green when the charging is completed.
NOTE:
A USB car adaptor is included to provide a USB power from a vehicle.
ON/OFF SWITCH (FIG 1)
The work light is equipped with an ON/OFF switch (10). Press the switch once to turn the work light on and press the
switch a second time to turn it off.
NOTE:
The work light is always on its brightest setting when switched on.
CHANGING THE LIGHT MODE (FIG 1)
The work light has 4 light modes: 3 brightness settings and a red-blue strobe for emergency.
To change the light mode, turn on the work light first by press the On/Off button (10). Soft press the On/Off button
without "Click" sound to rotate the light mode: High (100%), Medium (50%), Low (25%) and Red-Blue Strobe.
!
Due to modern mass production techniques, it is unlikely the product is
QTY
1
1
1
OPERATION
English
Description
USB Car Adaptor
Operator's Manual
4
QTY
1
1

Publicidad

Tabla de contenido
loading

Tabla de contenido