English
EN
8. Protection of the power cable: the power cables must be placed to avoid
being stepped on, crushed by furniture or imprisoned. Pay special attention to
cables from plugs, receptacles and exit points from the units themselves.
9. Overloading: Do not overload wall outlets, extension cords or power strips to
avoid possible electric shock or fire hazard.
10. Ventilation: the product must be properly ventilated. Do not place the
product on a bed, sofa or other similar surface. Do not cover the product with
objects such as tablecloths, sheets, newspapers, etc ...
11. Heating: The product should always be located away from heat sources
such as radiators, ovens, etc ... including amplifiers that emit heat. Never place
candles or other flammable sources near or on the unit.
12. Water and humidity: to reduce the risk of fire or electric shock, do not expose
the product to rain or place it in damp places such as a sauna, bathroom, etc ...
Do not use this product near water, for example, near from the bathtub, from
the kitchen sink, from the sink, on a damp base or near a swimming pool.
13. Liquid or object entry: Never insert objects through the ventilation holes of
the product, as it may touch high voltage points that could cause a possible fire
or generate electric shock. Never pour liquid of any kind into the product, nor
place any object that contains water or liquid on the unit.
14. Cleaning: unplug the product before cleaning it. The dust of the subwoofer
housing should be wiped with a dry cloth. If you use an aerosol cleaner, do not
spray it directly on the unit, throw it directly on the cloth that you will use for
cleaning. Be careful not to damage the unit with the cleaner.
15. Accessories: do not use accessories not recommended by the manufactu-
rer.
16. Other accessories: Do not place this product on an unstable surface, tripod
or table. The product could fall and cause serious injuries to children and adults,
in addition to breaking. Use only accessories recommended by the manufactu-
rer or those included with the unit. Any assembly carried out in the unit or the
unit must be carried out following the steps indicated by the manufacturer.
17. Transport the unit: transport the unit with caution. If you are going to use a
car for transport, keep in mind that quick and abrupt stops as well as sloping
and unstable surfaces can damage the unit.
18. Unused: if you are not going to use the product for a long period of time,
unplug the unit. Do the same in case of dangerous storms and with many
lightning bolts and lightning.
19. Technical service: do not try to fix the unit yourself, always go to authorized
and qualified personnel.
20. Unplug the cable from the unit if you are not going to use it for a long period
of time. When you turn it on again the system is in Stand-by mode (power
saving), which means that the unit is not completely off.
10
>> woxter.es