WOXTER Dynamic Line DL-410 Black Manual De Usuario página 15

English
EN
2. Place each of the speakers on the correct sides (left, right) of
the listening position.
3. Connect the playback device on the back of the main
speaker, on the 3.5mm plug with the supplied cable.
4. The main speaker (the right speaker) should be placed near
a power source and near the playback device (MP3, MP4, CD,
DVD, etc ...).
5. Finally, connect the power cable from the back of the main
speaker (right) to the network. Check that the current matches
the one written on the rear panel.
Functioning
1. Check that the volume is at the lowest possible level. The
volume buttons are located on the side of the right speaker.
2. Turn on the system by setting the switch to ON (located on
the back of the main speaker). The status indicator will light.
3. Start playback of the device and a song.
4. Adjust the volume to achieve the desired level.
5. Then adjust the treble and bass levels located on the side
panel to achieve the desired sound effect.
Position and ideal
place for your listening.
FL- Left front
FR- Front right
14
>> woxter.es